Preformed full tension splice rod for conductor

Preformed full tension splice rod for conductor

预绞式全张力接续条 Preformed full tension splice rod for conductor

 功能用途/ Function and Purpose

Preformed splice rod mainly include patch cord splice rod and full tension splice rod. Therefore, it can replace the patch cord clamp, parallel groove clamp and splicing sleeves.

产品特点/ Product characteristic

²  The grip is more than 95%RTS of conductor because stress is equally distributed in large touching area without intensive stress pivot.

²  The materials of splice rod selected good quality materials to against corrosion.

²  Simple structure is convenient for installation. Manual operation on the spot without any requirement of the special tools.

²  Good resistance to vibration performance.

使用须知/  Consideration

²  Select suitable splice rod according to the conductor specification.

²  The clamp can be used only once.

²  This product can be only operated by trained and skilled worker.

²  Be careful during working on live line or accessories to prevent electric shock.

The characteristics of the preformed conductor tension clamp are as follows:

1. The clamp has high strength and reliable grip. The greater the grip, the greater the tension and the greater the grip. The grip force of the clamp shall not be less than 95% of the cut (calculated strand breaking force).

2. The stress distribution of the wire clamp on the conductor of the pre twisted power hardware is uniform, which does not damage the conductor, improves the anti vibration ability of the conductor and greatly extends the service life of the conductor.

3. The installation is simple and the construction is convenient. It can greatly shorten the construction time and operate by one person without any special tools.

4. Fixture installation quality is easy to ensure, no special training, visual inspection.

5. Good corrosion resistance; the material is completely consistent with the conductor to ensure that the clamp has strong electrochemical corrosion.

Order description

1. Due to the special structure of the fixture, it can only be used once after being stressed and can not be reused.

2. The specification and model of conductor must be provided for optional products or ordering.

3. It is not allowed to lap on the clamp, but it is allowed to lap on the conductor before and after the clamp.

4. The rotation direction of clamp and conductor of pre twisted power fittings shall be the same. The standard clip is right-hand. If you need left-handed products, you have to declare them.

5. This product is precision equipment. In order to ensure the correct installation, it should be stored in the packing box to prevent collision or excessive pressure during the handling process, so as to avoid deformation of the pre twisted wire.

6. When working on or near live lines, special attention must be paid to prevent electric shock accidents.